All Bosch Gas Hot Water Systems are manufactured to the highest possible standards using only premium quality materials. We are constantly improving our design, engineering and manufacturing processes to ensure our customers only receive state of the art hot water systems. The Bosch promise of quality is the corner stone of our business.

The 32ltr commercial units are specifically designed for Australian and New Zealand commercial use. Options include one unit through to a fully manifolded system. The Bosch commercial units have all your applications covered. The 32 series has a coated copper heat exchanger to prevent corrosion and deterioration and the internal copper piping is 25% thicker than residential models to extend the life of the product. In addition, the Quick Connect Cord (KMQC0703339) is available for easy installation of 2 units manifolded for heavier applications.

The Bosch 32 and 32Q will, with a controller attached, reactivate within 1 minute of the power coming back on after a power outage and go back to the settings that it had before the loss of power (great for sporting complexes). Both the 32 and 32Q feature the same physical dimensions. Antifrost comes as a standard option with the 32 series.

The units can be installed either internally (using the Bosch flue kit), or externally with the additional Bosch accessory, Vent Cap (KMVC100), making the Bosch 32 series the most flexible units on the market.

The 32 series is most effective when coupled with the optional temperature controllers. The controllers offer fingertip water temperature control, accurate to single degrees. The commercial controller gives you the advantage of not having to mix hot water with cold water as this is done automatically inside the unit.

Bosch has also developed a range of Professional Packs ready to be shipped to your site for installation. The packs come with range of different sizes from a 250ltr tank and a 200mj burner to a 315 litre tank with a 250mj burner.

The unique features of the Bosch 32 and 32Q include:

• 32 litres per minute
• Either LPG or NG
• Internal and External applications
• Internal applications with standard flueing (e.g. available from any plumbing outlet)
• 4.8 stars
• Wall hung
• Minimum pressure for maxiume flow- 200 kPa
• Minimum flow rate 3.5ltrs per minute
• Direct ignition
• Capacity range 3.5 – 32ltrs minute
• Temperature settings – 37-48, 50, 55, 60, 65, 70, 75, 80 °C, factory set at 60 °C
• Safety devices – flame rod, thermal fuse, pressure relief valve, lightning protection device (ZNR), electric leakage prevention device, overheat prevention device, freezing prevention device, fan rotation detector
• 25 degree rise @ 32ltrs per minute
• Compact design
• Easy installation

Additional Features of the 32Q:

• Internal Pump – The internal pump is the additional benefit of the 32Q unit. This enables the consumer to not require an external pump for the system saving initial setup costs, space and for ease of installation for recirculating systems.
• Recirculation – Recirculation feature means there is always hot water in the pipes
• Circulation Mode – Main controller has a built in timer for recirculation pump
• Main remote controller – (RCM3211) included as standard with KM32111WHQ (NG/LP)

A full range of accessories are available to further enhance your options and comfort including:

Main Remote Controller – RCM3211

• Timer display (current time)
• Error display • High temperature display
• Temperature setting e.g. 40 degrees
• Burner on display e.g. this is displayed when the burner is on
• Circulation mode – this is displayed when circulation mode is on
• On / off button
• For both KM3211WHQ and KM3211WH
• Cannot have a sub controller without a main controller
• Maximum of 3 controllers can be fitted to the 32 & 32Q, being 1 Main controller and up to 2 Sub controllers

Sub Controller – RCS3211

• On / off button
• Burner on display e.g. this is displayed when the burner is on
• Temperature setting e.g. 40 degrees • Error display
• Priority indicator
• For both KM3211WHQ and KM3211WH

Vent Cap – KMVC100

• For both KM3211WHQ and KM3211WH
• For external installations only 

Other accessories include; Quick Connection Cable, System Controller, plus 3 or 5 metre cables for the system controller.